[Long] iron blower price Lobe Roots Blower 
 LT type (Pressure Conveyance) 
 Apply pressure :0-0 .6kgf/cm2 

 Diameter pressure range models 
 mmAq wind range 
 m3 / min hp 
 (HP) 
 LT-040 
 1.5 "0 ~ 6000 0.38 ~ 0.84 0.5 ~ 1 
 LT-050 
 2 "0 ~ 8000 0.30 ~ 2.92 2 ~ 5 
 LT-065 
 2.5 "0 ~ 8000 1.29 ~ 5.17 3 ~ 7.5 
 LT-080 
 3 "0 ~ 8000 1.70 ~ 8.64 5 ~ 15 
 LT-100 
 4 "0 ~ 8600 3.36 ~ 13.36 7.5 ~ 20 
 LT-125 
 5 "0 ~ 8000 6.66 ~ 24.66 10 ~ 30 
 LT-150 
 6 "0 ~ 8000 15 ~ 40 10.39 ~ 31.84 
 LT-200 
 8 "0 8000 25 75 12.93 - 51.03 
 LT-250 
 10 "0 21.60 ~ 79.70 ~ 8000 30 ~ 100 



 Roots Blower: Roots Blower Taiwan, the Taiwan Roots Blower, Roots Blower, Taiwan Roots blower, leaf blower, leaf blower. 
 A company of the blower chamber and the side cover flange and groove rim, in order to improve strength and prevent the operation of the blower bolted when the blast caused by eccentric behavior and the impact on life. 
 2: The company adopts the most advanced four-axis impeller machining a processing method to reduce human error, improve the precision of the impeller, and improve the efficiency of the blower. 
 Three: oil-free trouble-free. 
 Between the rotor and the wheel between the rotor and the shell, with an appropriate gap in the inter-operation without lubricant, mechanical parts of the contact, to adopt 
 Timing gear meshing model, and the shell wheel (rotor operation room) to the side cover gas separation, will not have oil mixed with danger, it spits out of gas 
 Body for non-oil component of the clean air, even in the case of long-term operation, also safe to use. A high degree of standardization of components, quality insurance 
 Card, all female parts are CNC machining automation, specifications are the same technology, even if the result of damage caused by improper use, also light 
 Easy to move the replacement of old parts, saving maintenance time, costs and working hours, part of the special supply of unexpected maintenance problems, well-trained outside the ground 
 Service personnel, so that YOU get the best service. 
 IV: low noise, low vibration 
 In the noise and vibration control, the Company has for many years to study, this is a series of new models using high precision rotor end 
 Structure, then type in ideal countercurrent compression. Spit out the pulse of the air blower can be even more smooth, noise and vibration can be significantly 
 Reduced, therefore, in terms of small blower, silencer-free installation of exports.